Materials for Planmeca PlanMill units

Abutment blocks

Viteo Base Ti

- Titanium bonding base for single tooth restorations
- Can be used with temporary and permanent restoration materials
- Available in two sizes: small diameter (SD) and medium diameter (MD)
- The special “soft edge” design of the bonding surface is specially designed for press and CAD/CAM ceramics
- Recessed rotation protection – safe positioning and ideal support of the restoration materials
- Abutment height can be adjusted from 6mm to 4mm when a press technique is used, not in CAD/CAM workflow
- Preconditioned bonding surface – strong bond
- Compatible with Elos Accurate® scan bodies and the most common implant systems (see combination table below)

Viteo Base Ti combination table

Viteo Base Ti combination table

Blocks with prefabricated interface suitable for Viteo® Base Ti

IPS e.max CAD LT BL2 A14 (SD)/5
IPS e.max CAD LT A1 A14 (SD)/5
IPS e.max CAD LT A2 A14 (SD)/5
IPS e.max CAD LT A3 A14 (SD)/5
IPS e.max CAD LT A3.5 A14(SD)/5
IPS e.max CAD LT B1 A14 (SD)/5
IPS e.max CAD LT B2 A14 (SD)/5
IPS e.max CAD LT C1 A14 (SD)/5
IPS e.max CAD LT C2 A14 (SD)/5
IPS e.max CAD LT D2 A14 (SD)/5
IPS e.max CAD LT BL2 A14 (MD)/5
IPS e.max CAD LT A1 A14 (MD)/5
IPS e.max CAD LT A2 A14 (MD)/5
IPS e.max CAD LT A3 A14 (MD)/5
IPS e.max CAD LT A3.5 A14(MD)/5
IPS e.max CAD LT B1 A14 (MD)/5
IPS e.max CAD LT B2 A14 (MD)/5
IPS e.max CAD LT C1 A14 (MD)/5
IPS e.max CAD LT C2 A14 (MD)/5
IPS e.max CAD LT D2 A14 (MD)/5
IPS e.max CAD LT BL2 A16 (SD)/5
IPS e.max CAD LT A1 A16 (SD)/5
IPS e.max CAD LT A2 A16 (SD)/5
IPS e.max CAD LT A3 A16 (SD)/5
IPS e.max CAD LT A3.5 A16(SD)/5
IPS e.max CAD LT B1 A16 (SD)/5
IPS e.max CAD LT B2 A16 (SD)/5
IPS e.max CAD LT C1 A16 (SD)/5
IPS e.max CAD LT C2 A16 (SD)/5
IPS e.max CAD LT D2 A16 (SD)/5
IPS e.max CAD LT BL2 A16 (MD)/5
IPS e.max CAD LT A1 A16 (MD)/5
IPS e.max CAD LT A2 A16 (MD)/5
IPS e.max CAD LT A3 A16 (MD)/5
IPS e.max CAD LT A3.5 A16(MD)/5
IPS e.max CAD LT B1 A16 (MD)/5
IPS e.max CAD LT B2 A16 (MD)/5
IPS e.max CAD LT C1 A16 (MD)/5
IPS e.max CAD LT C2 A16 (MD)/5
IPS e.max CAD LT D2 A16 (MD)/5

Telio CAD LT BL3 A16 (SD)/3
Telio CAD LT A1 A16 (SD)/3
Telio CAD LT A2 A16 (SD)/3
Telio CAD LT A3 A16 (SD)/3
Telio CAD LT A3.5 A16 (SD)/3
Telio CAD LT B1 A16 (SD)/3
Telio CAD LT B3 A16 (SD)/3
Telio CAD LT C2 A16 (SD)/3
Telio CAD LT D2 A16 (SD)/3
Telio CAD LT BL3 A16 (MD)/3
Telio CAD LT A1 A16 (MD)/3
Telio CAD LT A2 A16 (MD)/3
Telio CAD LT A3 A16 (MD)/3
Telio CAD LT A3.5 A16 (MD)/3
Telio CAD LT B1 A16 (MD)/3
Telio CAD LT B3 A16 (MD)/3
Telio CAD LT C2 A16 (MD)/3
Telio CAD LT D2 A16 (MD)/3